SkyRazor Shark Fin Antenna Replacement — 60-Second Installation

Give your vehicle a cleaner roofline and replace its factory whip antenna in about 60 seconds. The SkyRazor shark fin mounts over the existing antenna opening and connects to the original antenna lead beneath the headliner.

Its internal copper conductor supports FM, AM, DAB, and GPS reception without changing the vehicle wiring or head unit. You do not need to cut, solder, or modify the bodywork.

Made for a neat, factory-style fit

The 17 cm by 7 cm by 7 cm ABS housing sits flush with the roofline. It suits sedans, hatchbacks, SUVs, and most trucks that use a standard removable whip antenna.

Choose Black Carbon, Intense Black, Ivory White, or Metallic Gray. Depending on your selection, the shell has either a carbon-fiber weave or an automotive-grade gloss finish, helping you match the vehicle’s existing paint.

Copper signal core: Connects to the factory antenna lead while supporting FM, AM, DAB, and GPS reception.
Sealed roof base: A waterproof rubber gasket and pre-applied adhesive secure the fin to a clean roof surface.
Weather-ready shell: UV-resistant pigments and a sealed coating help resist chalking and fading.
Vehicle compatibility: Designed for vehicles with a removable whip antenna on the rear roof.

Install it in three steps

Remove: Unscrew or pull out the original whip.
Connect: Attach the copper signal wire to the original connector beneath the headliner.
Secure: Peel away the adhesive liner, align the fin with the roof contour, and press it firmly for 30 seconds.

Clean and dry the roof before fitting. Once installed, the gasket and adhesive are designed to withstand jet sprays, touchless washes, speeds above 80 mph, snow, winter conditions, and road grime.

SkyRazor Shark Fin	Stock Whip Antenna	Cheap Aftermarket Fins
✅ Copper wiring: Uses the original antenna lead for FM, AM, DAB, and GPS reception.	❌ Can become bent or faded in sunlight.	❌ Hollow plastic designs may discolor and weaken reception.
✅ Four finish choices: Select carbon weave or gloss in four paint-matching colors.	❌ Usually retains a plain black stick appearance.	❌ Often limited to glossy black without a carbon effect or paint match.
✅ Simple fitting: Peel, stick, and plug into the existing mount in roughly 60 seconds.	❌ Replacement can involve more involved fitting.	❌ Weak adhesive may lift after washing.

SkyRazor Shark Fin	Stock Whip Antenna	Cheap Aftermarket Fins
✅ Copper signal core wired into your original antenna lead — FM, AM, DAB & GPS stay clear	❌ Functional but bent, sun-faded, and looks decades old	❌ Hollow plastic toppers that discolor and reduce reception
✅ Four matched paint colors with real carbon weave or factory gloss finish	❌ Generic black plastic stick found on every economy car	❌ Glossy black only, no carbon effect or paint matching
✅ 60-second peel-and-stick to existing antenna mount, plug-and-play wiring	❌ Replacement often requires a body shop visit	❌ Weak adhesive tape that lifts after the first wash

SkyRazor Shark Fin

Stock Whip Antenna

Cheap Aftermarket Fins

✅ Copper signal core wired into your original antenna lead — FM, AM, DAB & GPS stay clear

❌ Functional but bent, sun-faded, and looks decades old

❌ Hollow plastic toppers that discolor and reduce reception

✅ Four matched paint colors with real carbon weave or factory gloss finish

❌ Generic black plastic stick found on every economy car

❌ Glossy black only, no carbon effect or paint matching

✅ 60-second peel-and-stick to existing antenna mount, plug-and-play wiring

❌ Replacement often requires a body shop visit

❌ Weak adhesive tape that lifts after the first wash

SkyRazor™ Shark Fin	Stock Whip Antenna	Cheap Aftermarket Fins
✅ Copper signal core wired into your original antenna lead — FM, AM, DAB & GPS stay clear	❌ Functional but bent, sun-faded, and looks decades old	❌ Hollow plastic toppers that discolor and reduce reception
✅ Four matched paint colors with real carbon weave or factory gloss finish	❌ Generic black plastic stick found on every economy car	❌ Glossy black only, no carbon effect or paint matching
✅ 60-second peel-and-stick to existing antenna mount, plug-and-play wiring	❌ Replacement often requires a body shop visit	❌ Weak adhesive tape that lifts after the first wash

SkyRazor™ Shark Fin